5 Simple Ways On How To Reuse Water
| | |

5 Simple Ways On How To Reuse Water

There has never been a better time to learn how to reuse water. Meanwhile, water scarcity is now no longer limited to specific regions or other highly populated parts of the world. Instead, it has become a global problem.

However, much of the problem is curable by focusing on simple ways on how to reuse water. Reusing water or water recycling is defined as the ability to repurpose water for the benefit of irrigation, treated potable water supply, or sequester it back in the ground for future use. 

According to The Ministry of Drinking Water And Sanitation, urban households with a family of four waste nearly 600 liters of water every week.

Let’s compare such a bulk usage of water with the availability of water resources. We know that this is a considerable quantity of water, and families should consider reusing techniques for long-term sustainability. 

So today, we have come up with simple ways to reuse water efficiently and cost-effectively. Let’s get started.

How To Reuse Water, Cut Wastage

Reusing water is a simple habit change that has become part of a routine. The best part is that almost anyone can use this technique to reuse the water and cut down its wastage.

1. Reusing Water For Washing Vegetables/Cooking

Reusing Water Used For Washing Vegetables/Cooking
Photo by PNW Production from Pexels

The water used in the kitchen for simple cooking purposes or washing vegetables and fruits is often not very dirty. Setting a pot or container under the spigot while washing, then set it aside until completely full.

This collected water could be used for other purposes, such as watering potted plants or flushing toilets.

Because this collected water might have pesticides, I would not recommend using it for drinking, especially children. But if it is to be used for anything else, it can be chlorinated or boiled first and then disinfected.

2. How Using A Shower Bucket Saves Water

It is no secret that a lot of water is intentionally wasted while bathing.

This is one of the most straightforward water reuse techniques.

Use a shower bucket to collect the water that drips down. It is a straightforward technique that will not cost you a single penny.

However, you will be amazed to know that you have saved a bucket full of water after the complete bath.

3. Creating A Rain Garden 

If you, by chance, have a standalone fountain or birdbath. Consider filling with water saved by utilizing the rainwater and collecting it in buckets and different pots.

In addition, you can also think of constructing a rain garden, a miniature ecosystem consisting of a pond. This is the best way to use all the water that falls from the sky.

4. How To Reuse Water Used For Gardening Purposes

Collect Water Used For Gardening Purposes
Photo by Torsten Dettlaff from Pexels

If you are passionate about gardening, it may be one of the areas where you excessively use water.
A unique way of water reuse is to capture most of the water that goes out through the drainage holes that can be reused.

These holes are present at the bottom of the pots, Consequently, water immediately leaves them after going through the soil.

Collect the water from the drainage holes ad pour it into a larger container for later use. This method saves water, especially if you have larger plants in your garden.

5. Recycle Excess Drinking Water

We all waste the drinking water, especially when we have to drink only half a glass of water and pour out the remaining half.

It has become such an indelible practice that we do not realize how much drinking water we waste daily.

In most cases, we empty the bottle of clean water to just fill it up again with the freshwater.

To avoid waste you should reuse this water. Consider this water as non-potable if only a portion is left in the glass.

Just keep a collection pot next to the sink, and instead of pouring it down the drain, pour it into a pot, easy.

How To Reuse Water On A Large Scale?

Water reuse is defined as direct reuse or indirect reuse.

Direct reuse water is treated wastewater pipped directly from wastewater facilities to industry for irrigation, power generation, or manufacturing locations. A golf course comes to mind with watered fairways and greens. 

Indirect reuse water is treated wastewater that is discharged directly to creeks, streams, or lakes. Highly filtered and treated water can supplement potable water supplies for cities and towns. 

These large-scale water reuse operations are heavily regulated by federal and state laws for water quality.

Large-Scale Uses For Recycled Water?

large-scale uses for recycled water
Photo by Marcin Jozwiak from Pexels

We have learned about how to reuse water efficiently and cost-effectively inside the homes without spending any money. Now let’s have a look at some of the uses for recycled water on a large scale. 

● Environmental restoration

● Surface cleaning of the roads and construction sites. 

● Used water can also be reutilized for dust control. 

● Recycling of the water to use it for power plants, factories, and refineries. 

● Reutilization of water for landscaping purposes such as cleaning the parks and maintaining the golf clubs. 

Final Thoughts

Water is the most vital blessing of nature, and we should never be wasting it in any way.

All life activities involve water use, so it is highly advised to make the best use of water resources and regulate the water reuse as much as possible.

Water reuses help us to save money and reduce wastage. They motivate us to stay connected with our environment.

These water reuse ideas are easy and very simple. Using these water reuse ideas, we can help the earth to be sustainable on a long-term basis.

Similar Posts